Custom ANETIK Apparel with Your Logo

ANETIK sun-protection tees, polos… and hoodies for outdoor crews working in the heat. Houston Embroidery Service adds your logo with embroidery or printing.

ANETIK: How Sun-Protection Fabrics Are Built for Long Hours Outdoors

Sun-protective clothing has to solve a contradiction. Covering more skin reduces ultraviolet exposure, but more fabric can also trap heat and sweat. For anyone working or fishing outside all day, a garment that protects but overheats ends up off the body, which defeats the point. ANETIK sun-protective shirts, covered below, show how fabric engineering handles that trade-off.

The problem: hours of direct UV

Sunscreen wears off with sweat, water and time, and it is easy to miss the back of the neck or forearms. Clothing does not wear off over the course of the day. That is why outdoor crews, guides and anglers increasingly rely on long sleeves, hoods and collars made from fabrics with a measured ultraviolet protection factor.

Who ANETIK is

ANETIK was started in 2015 by Kirk Presley, an outdoorsman who was frustrated that the gear available to him was too heavy, too hot and too bulky. According to the company, he took the idea to the surf industry, was turned down, and built the brand himself around ultralight performance apparel meant for extreme heat and sun. The brand describes its audience as people who spend long hours on salt water, fresh water, at altitude and in desert heat, which in practice means anglers, guides, boaters and outdoor athletes, and its fabrics are built around a lightweight mesh it calls PrimoLite. The company is based in San Clemente, California.

How UPF is measured

UPF, or ultraviolet protection factor, describes how much UV radiation passes through a fabric. A fabric rated UPF 30 lets roughly 1 unit of UV through for every 30 units that strike it, blocking about 96.7%.

In the United States, fabrics are tested under AATCC Test Method 183, which measures UV transmission through the textile in a lab. ASTM D6544 sets out how to prepare samples to simulate a garment’s condition after wear and laundering, and ASTM D6603 governs how the result is labeled on hangtags and care labels. Under the labeling scale, UPF 15 to 24 is rated good, UPF 25 to 39 is very good, and UPF 40 to 50+ is excellent.

Both ANETIK styles available through HES are rated UPF 30+, which falls in the very good category.

What controls protection: knit, fiber and color

Two polyester shirts can test very differently. Tighter knits leave fewer gaps for UV to pass through. Heavier fabrics generally block more than very sheer ones. Darker and more saturated colors absorb more UV than pale shades. Stretch matters too, because a fabric pulled tight across the shoulders opens its structure. Polyester itself absorbs UV better than untreated cotton, which is one reason performance sunwear is usually synthetic.

The two linked ANETIK products show how the same protection rating can come in different forms. The ANETIK MPLPRS0 Men’s Low Pro Tech Polo uses 6.6 oz per square yard 88/12 polyester/spandex PrimoLite mesh with 360-degree stretch, UPF 30+ protection, a precise active fit and what ANETIK calls VINT cooling technology.

View the Anetik MPLPRS0 Mens Low Pro Tech Polo

The ANETIK MVLPRH8 Low Pro Hooded Long Sleeve Tee uses a heavier 8.5 oz per square yard 88/12 polyester/spandex PrimoLite mesh with moisture management, UPF 30+ protection, a hood, a precise active fit and a zippered pocket on the back right side.

View the Anetik MVLPRH8 Mens Low Pro Hooded Long Sleeve Tee

Ventilation and moisture in Houston conditions

Sweat cools the body only when it evaporates. Wicking fabrics help by spreading moisture across a larger surface, and open mesh structures let air move through. But evaporation also depends on the air around the wearer. Houston summers combine high heat with high humidity, and when the air is already holding a lot of moisture, sweat evaporates slowly no matter what the shirt is made of.

That is why fabric weight and openness matter so much locally. In the Gulf Coast climate, a lighter, more open knit like the Tech Polo will usually feel cooler during midday work, while the hooded long sleeve trades some airflow for full coverage of the neck, ears and arms. A crew might wear the hoodie on open water or during the hottest exposure hours and the polo for customer-facing work.

Decorating lightweight stretch fabric

Performance mesh is comfortable because it stretches and breathes. Decoration can undo both if it is too large or too dense.

Embroidery size: on fabrics like these, a left-chest logo of about 3 to 3.5 inches wide is the practical maximum for most designs. Keep the stitch count modest, often in the range of 5,000 to 8,000 stitches, and avoid large fill areas that form a stiff patch on stretchy fabric.

Backing: use a soft cut-away backing, not tear-away. Tear-away backing gives way as the fabric stretches during wear, and the stitches can distort or pucker. A lightweight no-show mesh cut-away supports the design without showing through thin, light-colored fabric.

Heat transfers: when a print is preferred, use a low-temperature transfer made for polyester and spandex, typically applied around 270 to 300 degrees Fahrenheit. High heat can scorch or leave press marks on thin performance mesh, and it can draw dye out of the polyester into the transfer. A transfer with stretch built in moves with the fabric rather than cracking.

Placement: keep decoration off the hood, away from seams, and clear of ANETIK’s own small logo marks, which sit on the lower right sleeve of the polo and the right shoulder of the hooded tee. Check the zippered back pocket on the hooded tee before planning any back print.

Example: a landscaping crew uniform

For example, a Houston landscaping company outfitting a 12-person crew might order the MVLPRH8 hooded long sleeve in a mid-tone heathered color for field staff and the MPLPRS0 Tech Polo for the two supervisors who meet clients. Both carry the same 3-inch left-chest embroidered logo on cut-away backing, with a low-temperature heat-transfer company name across the upper back of the hoodies for visibility from a distance. The crew gets UPF 30+ coverage for long days in the sun, and the business keeps one consistent look across both garments.

Good sunwear is not the garment with the biggest claim on the tag. It is the one people keep wearing through the heat that made protection necessary.

For crew logos on sun-protective shirts, HES offers custom embroidery in Houston: See our custom embroidery services