Custom Lane Seven Apparel with Your Logo

Lane Seven hoodies, sweatshirts… and tees with a soft hand feel for brands and events. Houston Embroidery Service adds your logo by printing or embroidery.

Lane Seven: Why Fabric Hand Feel Became a Blank Apparel Advantage

Before anyone reads the logo on a shirt, they touch it. A customer at a merch table picks up a tee, rubs the fabric between thumb and finger, and decides in a second or two whether it feels cheap or worth keeping. The apparel trade calls that impression "hand," and blank makers now compete on it as hard as they compete on price.

A blank maker that leads with fabric

Founded in 2014, Lane Seven is a California blank apparel maker with an address in Irwindale, in Los Angeles County, and another in Gastonia, North Carolina. It sells plain garments to screen printers and decorators and sums up its approach in one line: "We do blanks better. It starts with better materials, it continues with better design." The two women’s styles discussed here, a relaxed tee and a fitted baby tee, show that fashion-first approach to cut.

What "hand" actually measures

Hand sounds subjective, but most of it comes from a few measurable choices.

Fabric weight is the simplest. It is given in ounces per square yard or grams per square meter (GSM). A 4.2 oz tee feels light and drapey. A 5.6 oz tee feels more substantial and holds its shape. Neither is better. They are different hands for different uses.

Yarn count describes how fine the yarn is. In the cotton count system, a higher number means a finer yarn: 30 singles is finer than 20 singles, and 18 singles is coarser still. Fine yarns knit into a thin, smooth, silky jersey. Coarser yarns produce a denser, sturdier fabric with more body.

Fiber preparation affects smoothness. Combing removes short fibers and impurities before spinning, leaving longer, parallel fibers that make a smoother yarn with fewer loose ends to cause pilling or a fuzzy surface.

Spinning method matters too. Ring spinning twists fibers tightly and evenly, creating a softer, stronger yarn than faster open-end spinning, which tends to feel rougher.

Finishing is the last step. Enzyme washes, garment dyeing and softeners all change how a fabric feels at the point of sale, though some softeners wash out over time.

A different angle on softness

Much of the market chases softness by going thinner, with fine 30 or 32 singles yarn in a 4 oz jersey. Lane Seven’s two women’s tees at HES take a different route. They use a heavier yarn knit into a heavier fabric, aiming for a hand that feels dense, smooth and substantial rather than featherlight.

The LS81001 Women’s Relaxed Tee is a 5.6 oz per square yard (190 GSM) 100% combed cotton jersey in 20 singles, reactive dyed. It has a 1x1 rib collar in 97% cotton and 3% Lycra for shape retention, shoulder-to-shoulder taping, narrow double-needle hems, side seams and a tear-away label. The cut is relaxed, sizes run XS to 3XL, and colors include White, Black, Bubblegum Pink, Baby Blue, Bone and Matcha.

View the Lane Seven LS81001 Womens Relaxed Tee

The LS82001 Women’s Baby Tee uses the same 5.6 oz, 20 singles combed cotton jersey (the Heather Grey is 90/10 cotton-poly), but in a short, fitted baby-tee cut, with body lengths from about 19.5 to 22.5 inches. It has a 1x1 rib collar, narrow double-needle stitching, side seams and a tear-away label, in sizes XS to 3XL.

View the Lane Seven LS82001 Womens Baby Tee

Softness versus durability

This is where the heavier choice pays off. Fine, thin jerseys feel wonderful new but can twist, thin out or develop holes faster. A 20 singles, 5.6 oz combed jersey has more fiber in every square inch, so it tends to keep its shape and opacity through more washes. Combing helps keep the surface smooth, and reactive dyes bond with cotton fibers for good colorfastness. Side seams keep the body from twisting. The rib collar’s small Lycra content helps the neckline recover instead of stretching out.

The tradeoff is weight in hot weather. A heavier tee feels warmer in a Houston August than a 4 oz fashion tee, so the right choice depends on how and when it will be worn.

Printing without killing the hand

A great-feeling blank can be ruined by a stiff print. A large rectangle of heavy plastisol turns a soft tee into a sticker. On 100% cotton like the LS81001 and LS82001, several methods protect the hand.

Water-based inks soak into the fibers instead of sitting on top, so the print feels almost like part of the fabric. They work best on lighter colors such as White, Bone or Baby Blue, and need full curing to survive washing.

Discharge printing works well on dark 100% cotton. The discharge agent removes the reactive dye and replaces it with color, leaving essentially no ink layer. On Black or other dark shades, it produces bright prints with almost no added feel. It doesn’t work as well on the Heather Grey, because the polyester portion won’t discharge.

When plastisol is needed, a few habits help: soft-hand additives, thinner deposits through higher-mesh screens, and artwork with open space or distressed texture instead of solid blocks of ink. Embroidery is also an option for small chest logos, though a dense fill on a 5.6 oz tee should use a soft cutaway backing to avoid a stiff patch on the chest.

A salon merch example

For example, a Houston hair salon selling branded tees at its front desk might pick the LS82001 baby tee in Bone and the LS81001 relaxed tee in Black. The baby tee gets a small water-based logo at the center chest in a warm brown. The relaxed tee gets a larger discharge print across the back. Customers who pick them up feel a soft, substantial shirt with a print that doesn’t feel like plastic, which makes a $25 or $30 retail price more believable.

Why touch drives value

In retail, people use feel as a shortcut for quality. A shirt that feels dense and smooth signals care in how it was made, and that impression attaches to the brand printed on it. For businesses selling merch, the blank’s hand isn’t a minor detail. It is part of what customers are paying for.

For soft-hand prints on retail-style tees, see our custom clothing printing services in Houston: See our custom clothing printing services