Custom Kastlfel Apparel with Your Logo
Kastlfel RecycledSoft tees made… with recycled polyester for brands that want lower-impact shirts. Your logo goes on by custom printing in Houston from HES.
- KAST-2010
$13.16 - $20.52KastlfelKastlfel 2010 RecycledSoftâ„¢ Unisex T-Shirt with Your LogoS - 3XL - KAST-2015
$10.94KastlfelKastlfel 2015 RecycledSoftâ„¢ Youth T-Shirt with Custom LogoXS - XL - KAST-2016
$18.48 - $25.60KastlfelKastlfel 2016 RecycledSoftâ„¢ Long Sleeve Tee with Your LogoXS - 3XL - KAST-2021
$13.02 - $16.64KastlfelKastlfel 2021 RecycledSoftâ„¢ Women's Tee with Your ArtworkS - 2XL
Kastlfel Recycled Polyester: From Waste Stream to Wearable Fabric
"Made from recycled bottles" is printed on a lot of hangtags, but the path from a used water bottle to a soft T-shirt has several steps, and each one affects the quality of the fabric and how far the environmental claim really goes. Following that path also explains why a recycled-blend shirt, like the Kastlfel RecycledSoft tees covered below, prints differently from an all-cotton one.
Step one: collection
Almost all recycled polyester starts as PET drink bottles. According to a 2026 lifecycle study from Textile Exchange and SCS Global Services, reported by ESG Dive, about 98% of recycled polyester is made from post-consumer bottles. Those bottles come from curbside recycling, deposit-return programs and commercial collection. Bottles are used because they are made of the same polymer as polyester fiber and are collected in large volumes.
Step two: sorting
Collected material arrives mixed with other plastics, metals, paper and glass. Recycling facilities separate PET from everything else, usually with optical sorters, and often by color too. Clear PET is the most valuable because it can be dyed any shade later. Colored bottles limit the final fabric to darker colors.
Step three: cleaning
Labels, caps and glue have to come off, and so do leftover drinks and dirt. The bottles are ground into small flakes, then washed, often in hot caustic baths, and rinsed. Contamination at this stage is the main enemy of fiber quality. Even small amounts of PVC or adhesive can create weak spots or discoloration in the finished yarn.
Step four: reprocessing
There are two main routes. Mechanical, or thermomechanical, recycling melts the clean flakes and extrudes them into pellets, or chips. This is the most common method and the least energy intensive. Chemical recycling breaks the polymer down into its building blocks and rebuilds it, which can remove more contaminants and dyes but requires more processing.
Step five: forming the fiber
The chips are melted again and pushed through a spinneret, a plate with tiny holes, to form continuous filaments. These can be used as long filament yarn or cut into short staple fibers. Staple fiber is the form used in T-shirt blends, because it can be spun together with cotton.
Step six: yarn and fabric
The recycled staple is blended with cotton, spun into yarn, knitted into jersey and dyed. At this point it behaves much like any other poly-cotton jersey. The recycled origin isn’t visible in the fabric. It only shows up in the documentation behind it.
What Kastlfel does with it
Kastlfel was developed by Denver-based Ecocentric Brands. In March 2026, Colorado-based Jack and Sage acquired the brand’s assets, intellectual property and inventory, while Ecocentric Brands continues to run screen print decoration in Denver to water-based, sustainability-focused standards. Kastlfel builds its RecycledSoft line around this kind of blend. Both RecycledSoft tees carried by HES, the 2010 Unisex RecycledSoft T-Shirt and the 2021 Women’s RecycledSoft Tee, are 60% certified organic cotton and 40% certified recycled polyester. The yarn is combed ring-spun 30 singles, and the fabric weighs 4.6 oz per square yard. Both have a contemporary fit, an eco-enzyme finish, low-impact OEKO-TEX certified dyes, a spandex-reinforced rib collar, back neck and shoulder taping, side seams and a water-based printed neck label that lists sustainability data. The unisex 2010 runs S to 3XL. The women’s 2021 runs S to 2XL.
View the Kastlfel 2010 Recycledsoft Unisex T Shirt
View the Kastlfel 2021 Recycledsoft Womens Tee
Kastlfel’s own RecycledSoft page says each tee saves at least six 20 oz plastic bottles from landfill, saves about 1.05 kilowatt hours of electricity, and uses about 1.94 gallons less water than a conventional poly-cotton dyed shirt. These are the brand’s figures, and the page doesn’t explain how they were calculated, so they are best read as the manufacturer’s estimates.
The broader numbers
Independent data points in the same direction, with caveats. Textile Exchange, citing the Higg Materials Sustainability Index, reports that each kilogram of mechanically recycled polyester represents a greenhouse gas reduction of more than 70% compared with virgin polyester. The 2026 Textile Exchange lifecycle study found a wider range depending on the recycler. Thermomechanically recycled chips came in around 0.96 to 1.31 kg of CO2, while virgin polyester yarn or staple came in around 3.96 to 4.76 kg. The study also found that transport distance and the local power grid can shift those results significantly.
The limits worth knowing
Recycled polyester isn’t a closed loop. Most of it comes from bottles, not old clothes, so it diverts packaging waste rather than solving textile waste. Each mechanical melt shortens the polymer chains slightly, which is why bottle-grade PET can usually be recycled into fiber but fiber is much harder to recycle again. Like all polyester, it can also shed microfibers during washing. And a 60/40 blend is harder to recycle at the end of its life than a single-fiber garment, because the cotton and polyester have to be separated. The honest claim for a shirt like RecycledSoft is that it uses less virgin plastic and less energy than an equivalent conventional blend, not that it has no impact.
Printing on recycled poly blends
A 60/40 blend with 40% polyester prints mostly like a cotton-rich shirt, but the polyester still affects the process.
Dye migration is the main risk. Polyester is dyed with disperse dyes that can turn to gas at high heat and move into the ink layer. On darker colors such as Red or Midnight Blue, a white plastisol print cured at a standard 320°F can pick up a pink or blue tint. Low-cure plastisol inks, which cure at roughly 270 to 300°F, reduce that risk, and a gray bleed-blocking underbase adds protection on the most vivid colors.
Water-based inks give the softest hand on a 4.6 oz tee, but they need full curing and tend to look slightly muted on the polyester portion. Discharge printing only removes dye from the cotton fibers, so on a 60/40 blend it produces a softer, heathered look rather than a bright result. Heat-transfer and DTF prints also work, as long as press temperatures stay within the range recommended for polyester blends.
For example, a Houston coffee roaster ordering staff shirts on the Carbon colorway with a white logo might choose a low-cure white ink with a thin underbase, plus a test print washed once before the full run. That keeps the print bright, the hand light, and the recycled fabric free of heat damage.
For prints on recycled-blend shirts, explore our custom clothing printing services in Houston: See our custom clothing printing services
