Custom Chef Hats Embroidered with Your Logo

If you run a kitchen and the coats and aprons are already sorted, the hat is usually the last thing on the list. Good news: it's a short list. Our custom chef hats come down to three styles, a skull cap, a chef beanie and a classic chef hat, and we embroider your logo, or a cook's initials, on the front band of each one. No minimum, so one hat for the head chef is fine.

Custom Chef Hats: Which of the Three Fits Your Crew?

All three put the logo in the same spot, front and center on the band. What changes is the fabric, the colors and how the hat stays on your head.

The custom chef skull cap (Chef Designs HP70)

The Chef Designs HP70 Skull Cap is a 65% polyester / 35% cotton twill with an elastic back. It's the only one of the three sold in two sizes. M is listed at 23" and L at 25", and the elastic back gives 1" of extra stretch on top of that.

We get asked if it comes in white. It doesn't, and that's the catch with this one: black is the only color listed.

The chef beanie (Artisan Collection by Reprime RP653)

The Artisan Collection RP653 Chef's Beanie has a flat top and an elastic back. The fabric is 5.8 oz (ounces per square yard, so a bigger number means heavier cloth), a 65/35 recycled polyester/cotton, and that recycled polyester comes from post-consumer plastic. Handy if that matters to your brand. One Size, in Black or White.

Looking for a winter knit beanie instead? Those live in our beanies category.

The chef hat (Chef Designs HP60)

The Chef Designs HP60 Chef Hat is 80/20 polyester/cotton, listed as performance poplin, with an adjustable hook-and-loop closure at the back. One Size, in Solid Black or Solid White.

So how do you pick? Real talk: if your crew's head sizes are all over the place, the skull cap is the only one you can order by size. The beanie and the chef hat are One Size and lean on the elastic or the strap to fit, and one size on a label doesn't mean the same fit on every head, so have two or three cooks try one on before you order for the whole line. Five minutes, well spent.

Color narrows it fast, too. All white? That's the beanie or the chef hat. All black? Any of the three.

How much logo fits on embroidered chef hats?

Less than most people think. On all three hats the logo sits centered on the front band, clear of the band edges and away from the elastic or the hook-and-loop at the back. That's a narrow strip of fabric. A long wordmark that looks great on a coat chest can get squeezed so small the little letters fill in.

Every logo is digitized first, which means we rebuild it as a stitch file the machine follows. On a band this size, that's where most of the work happens. We set the stitch count (the number of stitches in the design) and the thread colors for the space you have, not for the original artwork. Fewer colors usually read better this small.

Small tip from the embroidery room: print your logo small, hold it against the front of a hat, and step back across the pass. Can you still read it? If not, we'll talk about a short version, maybe just the icon or the initials.

For a custom logo chef hat, a vector file (a logo file that scales cleanly) gives us the sharpest start. You approve a mockup, a picture of the finished hat, before anything gets stitched, and every file follows our Artwork Acceptance Policy. Our custom embroidery page covers the rest of the stitching side.

Monogrammed Chef Hats and Names for Each Cook

Not every kitchen wants a logo. Some want each cook's initials on the hat, so nobody grabs the wrong one. A monogrammed chef hat does that job, a bit like writing names on the deli containers in the walk-in.

We'd keep it to initials, two or three letters in one thread color. Full names get long fast on a band this narrow. Small lettering works best in satin stitch, the smooth, narrow stitch, so the letters stay sharp.

People also ask if the logo and the initials can share one hat. On this band, we'd pick one. Logo on the hat, name on the chef coat.

For personalized hats, send one list: initials, hat style, color, and size for the skull cap. Clean. No guessing at the machine.

Before you order

Is there a minimum? No. One hat is fine, and you can mix all three styles and colors in one order.

How long does it take? The mockup comes back in 2–3 working days. After you sign off on it, plan on 7–10 working days for a smaller hat order. Hats for a whole restaurant group? Get the timeline from us before you set a date.

What changes the price? The hat you choose, the stitch count, the logo size and how many hats you order. For a real number, request a quote.

Can the hats match the rest of the uniform? Yes. Use the same logo file for the hats, chef aprons and chef pants so the thread colors line up. We keep your stitch file, so the next order starts from it. The rest of our kitchen and work gear is under workwear.

Pick a hat and a color, then send your logo or the initials list. We'll take it from there.

Not sure your logo fits the band? Send it anyway. You'll see it on the hat in the mockup before a single stitch goes in.