Custom Rabbit Skins Apparel with Your Logo
Rabbit Skins infant and… toddler tees made with soft materials and secure construction. Add your own logo by careful custom printing in Houston from HES.
Rabbit Skins: Why Infant and Toddler Apparel Needs Extra Care
A baby’s shirt is not just an adult T-shirt made smaller. Infants and toddlers have more sensitive skin, put everything in their mouths, cannot tell anyone when a seam is rubbing, and go through more laundry in a week than most adults do in a month. Their clothing is also regulated by federal children’s product rules that do not apply to adult apparel. For anyone ordering custom baby and kids’ shirts, whether for a daycare, a baby shower, or a family business, those differences shape every choice from fabric to ink.
Rabbit Skins and the children’s apparel category
Rabbit Skins has made baby and toddler apparel since 1982 and is part of LAT Apparel, based in Ball Ground, Georgia. The brand focuses on newborn, infant, and toddler basics such as bodysuits and tees, made largely in cotton, and LAT states that its products are CPSIA certified. Its blanks are widely used by decorators because they are built for printing.
Sensitive skin and softness
Young skin is thinner and more easily irritated, so the fabric touching it matters. Cotton jersey is the standard choice because it is soft, breathable, and absorbent. Rabbit Skins builds its line largely around 100 percent cotton and OEKO-TEX certified fabrics.
Even the label matters. A stiff printed or sewn tag at the neck can rub a baby’s skin, which is why many children’s garments use tear-away or printed labels. The Rabbit Skins 3301J Youth Juvy T-Shirt that HES carries, for example, uses an EasyTear label so the tag can be removed cleanly.
Seams and construction
Seams should be flat, soft, and placed away from areas that press against a lying or crawling child. Shoulder-to-shoulder neck tape covers the back neck seam so raw edges do not touch skin. The 3301J has a ribbed collar, self-fabric back neck tape, and double-needle stitching on the sleeves and bottom hem, the kind of construction that keeps a kids’ shirt flat after repeated washes.
Fasteners and the choking risk
Infant clothing often uses snaps or lap shoulders so it can be pulled over a baby’s head without a struggle. Every fastener, button, and decoration has to stay firmly attached, because anything that comes loose can end up in a child’s mouth.
The federal small-parts rule, 16 CFR Part 1501, covers toys and other articles intended for children under 3, and it lists children’s clothing and accessories such as buttons among its exemptions. That exemption does not make loose parts safe. For decorated baby clothes, the practical rule is to keep added items off the garment entirely: no glued rhinestones, sewn-on buttons, or loose appliqué pieces on anything meant for babies or toddlers.
Fit that allows for growth
Babies grow fast, so infant sizing is based on age ranges, and many parents buy a size up. For group orders, such as a daycare classroom, it helps to collect actual sizes rather than guess by age. A child at the top of one age range will often need the next size.
Laundering
Children’s clothes go through constant washing, often with hot water and strong detergents after spills and diaper leaks. Fabric needs to resist shrinkage and hold its shape, and decoration needs to survive the same routine without cracking, peeling, or fading.
The federal rules for children’s apparel
Clothing designed for children 12 and under is a children’s product under the Consumer Product Safety Improvement Act (CPSIA). That brings several requirements.
Tracking labels. Children’s products must carry permanent marks on the product and its packaging, to the extent practicable, that identify the manufacturer or private labeler, the location and date of production, and the batch or run. On apparel this is usually a printed or sewn label. The 3301J carries a CPSIA-compliant tracking label on its side seam.
Lead limits. Accessible components of children’s products may not contain more than 100 parts per million total lead. Paint and similar surface coatings on children’s products are limited to 0.009 percent lead, or 90 ppm. Decoration is part of the finished product, so inks, transfers, and trims should be ones their makers state meet CPSIA requirements.
Phthalates. Children’s toys and child care articles, meaning items intended to help children 3 and younger sleep or feed, may not contain more than 0.1 percent of eight listed phthalates in any accessible plasticized component. Because traditional plastisol ink is plasticized, decorators commonly use phthalate-free plastisol or water-based ink on children’s items to stay clear of the issue.
Certification. Manufacturers and importers certify compliance in a Children’s Product Certificate, based on testing by an accepted third-party lab.
Print guidance for infant and toddler tees
Choose soft-hand inks. A heavy plastisol print creates a stiff, sweaty patch on a small shirt. Water-based or discharge inks on light and medium colors soak into the cotton and stay soft. If plastisol is needed for opacity on a dark shirt, a thinner deposit with a soft-hand additive helps.
Keep the print small. A baby’s chest is narrow, and a large print wraps under the arms and stiffens the garment. On infant tees and bodysuits, a front design is typically about 4 to 6 inches wide; on toddler tees, around 6 to 8 inches. Leave clear space around snaps, the neck opening, and side seams.
Watch embroidery. Embroidery can work on kids’ clothing, but the backing on the inside sits against the skin. A small design with a soft cover backing or fusible lining over the stitches keeps it comfortable. Dense, large embroidery is better saved for older children.
Cure fully. An undercured print may crack or wash off, which is both a quality problem and a reason not to cut corners on dryer time for small garments.
Examples: a baby shower and a daycare
For example, a family planning a baby shower might order soft-hand printed tees for the expecting parents’ older children, with a simple "Big Sister" or "Big Brother" design about 6 inches wide. The 3301J youth tee, offered in 31 colors in sizes 5/6 and 7, fits that role well. It is 5.5 oz, 100 percent cotton jersey (Ash is 99/1 cotton/polyester and Heather is 90/10).
A Houston daycare might order shirts for staff and for children’s field days, with a small logo printed in water-based ink. Ordering by class, with sizes confirmed by parents, keeps the order accurate.
Why this category needs its own standards
Infant and toddler clothing has to be softer, simpler, more securely made, and more carefully decorated than adult apparel, and it carries federal requirements that do not apply to adult T-shirts. Blanks from a brand built for that market, combined with soft inks, small prints, and nothing that can come loose, produce custom kids’ clothing that is comfortable, durable, and compliant.

