Custom Recover Apparel with Your Logo
Recover recycled hoodies, sweatshirts… and tees made from plastic bottles and scrap fabric. Houston Embroidery Service adds your logo by print or embroidery.
- RECO-RC1096
$46.02RecoverRecover Quarter-Zip with Your Company Embroidered Logo LogoXS - 2XL - RECO-EC100
$18.42RecoverRecover EC100 Men's Eco Tee with Your Artwork+4XS - 3XL - RECO-EC500
$32.20RecoverRecover EC500 Men's Eco Polo with Your Artwork+4XS - 3XL - RECO-EC650
$44.92RecoverRecover EC650 Men's Eco Button Down Shirt with Custom Logo+4XS - 3XL - RECO-RC1090
$53.88RecoverRecover RC1090 Unisex 2 Full-Zip Sweatshirt with Custom LogoXS - 2XL - RECO-EC102
$22.46RecoverRecover EC102 Eco Long Sleeve Tee with Your Artwork+4XS - 3XL - RECO-RC1093
$44.92RecoverRecover RC1093 Unisex Fleece 2 Hooded Sweatshirt Custom LogoXS - 2XL - RECO-EC200
$18.42RecoverRecover EC200 Women's Eco Tee with Your Artwork+4XS - 2XL - RECO-RC1095
$35.92RecoverRecover RC1095 Unisex Recycled Crewneck Sweatshirt Your LogoXS - 2XL - RECO-EY100
$13.48RecoverRecover EY100 Youth Eco Tee with Your Artwork+4XS - L - RECO-RCY1093
$35.92RecoverRecover RCY1093 Youth 2 Hooded Sweatshirt with Company LogoS - L
Recover: How Textile Recycling Turns Post-Consumer Waste Into Apparel
An old shirt or a plastic bottle can become raw material for new clothing, but the route from waste to wearable fabric has several steps, and each one changes what the final garment can be. Following that route, with Recover Brands as an example, explains both why recycled apparel works and where its limits are.
Step one: the waste stream
Recycled apparel draws on two main kinds of waste. Post-consumer waste is material people have already used and thrown away, such as worn clothing or drink bottles. Pre-consumer waste is scrap created during manufacturing, such as the fabric left over when garment panels are cut from a roll.
Recover Brands, an apparel maker based in Charlotte, North Carolina, uses both. The company was started in 2010 by North Carolina natives Bill Johnston and John Riddle. Its recycled tees combine polyester made from post-consumer plastic bottles with cotton recovered from cut-and-sew scrap. The company has said that about eight plastic bottles go into one Recover shirt.
Step two: sorting
Sorting decides almost everything that follows. Bottles are collected, labels and caps are removed, and the plastic is cleaned before it is processed into polyester fiber. Cotton scrap is sorted by fiber content and by color.
Color sorting is one of the most useful ideas in the process. Because cutting-room scrap is already dyed, grouping it by shade lets the recycler produce colored yarn without dyeing it again. Recover describes its cotton as color-sorted so that no new dye is needed, which removes a step that normally uses a lot of water, heat and chemicals. Contamination matters too: zippers, buttons, labels and heavy prints all have to be removed or avoided.
Step three: shredding
Mechanical recycling cuts and pulls fabric back into loose fiber. This is effective, but it is rough on the material. The tearing action breaks cotton fibers, so recovered cotton is generally shorter than virgin cotton. Shorter fibers are harder to spin into fine, strong yarn and can shed more lint.
Step four: fiber recovery and blending
Because recovered cotton fiber is shorter, it is usually blended with a longer, stronger fiber to make spinning possible. Recycled polyester fills that role well. Polyester made from bottles is melted and extruded as new filament, so it can be made to a consistent length and strength regardless of the bottle it came from.
The blend is a practical compromise. The polyester adds strength and consistency. The cotton adds a softer, more natural hand and the color that came from the sorted scrap.
Step five: spinning and knitting
The blended fiber is spun into yarn and knit into fabric. Yarn size is described in singles; a higher number means a finer yarn and usually a smoother, softer fabric. Both Recover tees available through HES use 26-singles yarn, which sits between a coarse basic tee and a very fine fashion tee.
What is lost and what is gained
Recycling is not a perfect loop where one shirt becomes an identical new shirt. Some quality is lost: recovered cotton is shorter and less uniform, which limits how fine the yarn can be. Color choices also depend on what scrap is available, so recycled-cotton shades can look slightly heathered or muted rather than perfectly flat.
What is gained is significant. Waste stays out of landfills, the polyester replaces newly made plastic, and the dyeing step can be skipped. A 2023 study published in the journal Sustainability compared the water footprint of conventional, eco and recycled cotton T-shirts. It found the recycled shirt’s water scarcity footprint was roughly 97 percent lower than the conventional shirt’s, and its water-eutrophication footprint was about two-thirds lower. The authors noted the benefit is greatest in regions under heavy water stress. Results depend on the supply chain studied, so the figures are best read as a sign of scale rather than a promise for every garment.
The Recover tees available through HES
The Recover EC100 Men’s Eco Tee is made from 4.4 oz./yd² 50/50 recycled cotton/recycled polyester in 26 singles. It has a retail fit, double-needle stitching, back neck tape, shoulder-to-shoulder taping, a ribbed-knit neckline, side seams and a pad-printed neck label. A locker loop in the neck tape carries a hangtag explaining the material story. It comes in 10 colors, including Ash, Charcoal, Cobalt, Fern and two Rainbow options, in sizes XS through 3XL: View the Recover EC100 Mens Eco Tee
The Recover EC102 Eco Long Sleeve Tee uses the same 4.4 oz./yd² 50/50 recycled cotton/recycled polyester fabric and 26-singles yarn, with ribbed-knit cuffs added. It comes in the same 10 colors and XS through 3XL sizing: View the Recover EC102 Eco Long Sleeve Tee
Both are listed with recycled cotton and recycled polyester content. Buyers who need a specific third-party certification should confirm the current documentation for the exact style before making a certified claim on their own marketing.
Printing on recycled cotton/poly blends
A 50/50 blend prints well, but it behaves differently from 100% cotton.
Watch dye migration. Polyester fibers can release dye when heated, which can tint a white or light ink on darker shirts. On dark colors, a low-cure ink or a dye-blocking underbase helps keep white prints clean. Plastisol inks made for poly blends are a common choice.
Keep cure temperatures in check. Polyester is sensitive to high heat. Curing at the lower end of the ink’s recommended range reduces the risk of scorching or shine.
Consider water-based or discharge inks carefully. Water-based inks can give a very soft print on blends, though colors may look slightly vintage because the polyester takes ink less readily than cotton. Discharge inks only remove dye from the cotton portion, so results on a 50/50 blend are muted and less predictable.
Embroidery should stay light. On a 4.4 oz. tee, a left-chest logo of about 3 to 4 inches with moderate stitch density and a soft backing will lie flatter than a dense, heavy design.
Mind the heathered look. Because recycled-cotton colors can be slightly heathered, test a sample when brand colors need to match closely.
A practical example
For example, a Houston nonprofit running a neighborhood cleanup could choose the EC100 in Fern with a one-color white print on the chest and a short message on the back. The shirt itself becomes part of the story: the hangtag explains the recycled content, and a simple print keeps the hand soft enough that volunteers keep wearing the shirt afterward.
Why longevity matters most
The environmental value of a recycled garment grows the longer it stays in use. A well-printed shirt that people actually wear for years does more good than one that gets thrown out after a single event. Choosing a comfortable blank, a print method that suits the blend and a design people want to wear is the last step in the recycling chain, and the one the buyer controls.
