Custom Big Accessories Apparel with Your Logo
Big Accessories caps, work… hats and beanies for staff programs, crews and events. Houston Embroidery Service adds your company logo with custom cap embroidery.
Big Accessories: Why Branded Caps Can Rival Promotional Shirts
Promotional exposure depends on how often an item is used and seen, not on what category it belongs to. A T-shirt might be worn once to an event and then sit in a drawer. A cap can become part of someone’s weekly routine, worn to the gym, on errands and at weekend games. That repeat use is why caps are one of the most cost-effective items a business can put its logo on. Big Accessories, a headwear-focused brand, is a good place to see why.
What the research actually shows
The Advertising Specialty Institute (ASI), the promotional products industry’s trade organization, regularly measures impressions, meaning the number of times people see a branded item. Its findings give a more honest picture than the common claim that accessories always beat shirts.
In ASI’s 2026 Ad Impressions Study, a $13 baseball cap averaged about three-tenths of a cent per impression. ASI’s 2026 figures for T-shirts put a well-loved shirt at about 3,500 lifetime impressions, at roughly one-third of a cent per impression. In cost per impression, the two are close, with the cap slightly ahead.
ASI’s 2023 study gave a different breakdown. Headwear averaged 3,380 lifetime impressions, with an $8 cap costing under a quarter of a cent per impression. T-shirts averaged more impressions, 5,053, at about one-fifth of a cent for a $10 soft tee. In that study, 56% of consumers said they would keep a cap for a year, while 47% would keep a T-shirt for two years.
The takeaway is not that caps always win. It is that a cap the wearer likes competes with a shirt on cost per impression, often at a lower price per piece, and it is seen in places where a shirt is covered by a jacket or never leaves the closet. Both outcomes depend on the item being worn.
Big Accessories: a headwear-focused brand
Big Accessories is sold through S&S Activewear, where its catalog of about 56 items is almost entirely headwear: six-panel and five-panel caps, trucker caps, golf caps, washed and brushed twill caps, beanies in cuffed, slouch and watch-cap styles, bucket hats and visors. The range is built for decorators: both caps below, for example, have tear-away tags so the finished product can carry the customer’s own label.
Two HES caps show how much construction matters within one brand.
BX880 Six-Panel Twill Cap
View the Big Accessories BX880 Six Panel Twill Cap
The BX880 is a 100% cotton twill cap with a low-profile, unstructured six-panel crown. It has an adjustable hook-and-loop closure and sewn eyelets for ventilation. Colors include Black, Navy, Stone, Red, True Royal, Hunter, Dark Grey, White, Blush and Team Orange.
BX034 Five-Panel Brushed Twill Cap
View the Big Accessories BX034 Five Panel Brushed Cap
The BX034 is 100% brushed cotton twill with a structured five-panel crown. Its front panel is backed with buckram, a stiff fabric that holds the cap’s shape, and the crown height is about 3.4 inches. It closes with a self-fabric strap, a brass buckle and a grommet tuck-in.
How the front panel changes the logo
These two caps need different artwork setups even before color is chosen.
On the BX880, a seam runs down the center of the front, splitting it into two panels. The crown is soft and low, so there is no stiff backing to support stitching. A front logo on this kind of cap is typically limited to about 4 inches wide and 1.75 to 2 inches tall. Designs should avoid placing thin lettering or a small detail right on the center seam, where stitches can sink and distort. Because the crown is unstructured, the embroidery needs a stabilizer behind it and a lighter stitch density, often in the 4,000 to 6,000 stitch range for a front logo, to keep the panel from puckering.
On the BX034, the five-panel front is one uninterrupted panel backed by buckram. That gives a flat, firm surface for embroidery, so a front logo can typically run up to about 4.5 inches wide and 2 to 2.25 inches tall. Small text holds up better because there is no seam through the middle, and the structure supports a denser design, often 5,000 to 8,000 stitches. This style is also listed as suitable for screen printing and direct-to-garment printing.
For example, a Houston landscaping company with a wide, two-line logo would get a cleaner result on the BX034’s seamless front. A short monogram or icon would work well on either cap and might look more casual on the soft BX880.
Wearability rewards restraint
Businesses often ask for the largest front logo possible. That can make the cap look like a giveaway and reduce how often it is worn. A slightly smaller embroidered logo, a side mark or a woven patch can make the cap feel more like retail headwear. If the wearer likes the cap, the logo gets seen far more often than a large design on a cap nobody chooses.
Cost-per-wear math
Cost per impression is useful, but cost per wear is easier to estimate for your own program. Here is a simple example with round numbers.
A decorated cap that costs $15 and is worn twice a week for a year gets about 100 wears. That is 15 cents per wear.
A decorated event T-shirt that costs $9 and is worn ten times before it is retired costs 90 cents per wear.
A cheaper $10 cap that fits poorly and is worn five times costs $2 per wear.
The numbers change with every audience, but the pattern holds: the price that matters is the price per use, and fit and comfort drive use.
How to choose caps people keep
A few questions help predict whether a cap will be worn. Does the profile suit the audience? Low, soft caps feel casual; structured caps feel more like a uniform. Will the closure fit a wide range of heads? Is the color something people already wear? Is the logo sized to look intentional rather than oversized? And for crews that need year-round coverage, the same brand can supply beanies for winter and visors for golf events, keeping the identity consistent while the product changes with the season. Each of those products needs its own version of the logo: a beanie cuff usually takes a design only about 1.5 to 2 inches tall because of the knit’s stretch and the cuff’s depth, and a visor front leaves even less vertical room. Approving a sewout on the actual style before a full run catches problems that a flat mockup hides.
For logos sized to each cap, HES offers custom embroidery in Houston: See our custom embroidery services

