Custom Bulwark Apparel with Your Logo
Bulwark flame-resistant work shirts,… coveralls and work tees for industrial crews. Houston Embroidery Service adds your company logo with custom embroidery.
Bulwark FR Workwear: The Science Behind Flame-Resistant Safety
Along the Houston Ship Channel, a work shirt can be the last barrier between a person and a flash fire or an electric arc. Ordinary cotton or polyester can ignite and keep burning after the heat source is gone, and synthetic fibers can melt onto skin. Flame-resistant (FR) clothing is engineered to do the opposite: resist ignition, self-extinguish, and limit the heat that reaches the body. That is why FR apparel is bought against standards and test data, not against general claims of toughness. Two Bulwark garments sold at HES show how that works in practice.
Start with the hazard
Refineries, chemical plants, and gas processing sites face flash fire, a short, intense burst of flame from ignited vapor, dust, or gas. Electric utilities, substations, and plant electricians face arc flash, an explosive release of energy from an electrical fault. The two hazards are measured differently, and they fall under different standards.
For a Houston buyer, the practical question is never just "Do we need FR shirts?" It is "Which hazard did our safety assessment identify, and what rating does it require?" A petrochemical operator may need garments certified to NFPA 2112. A utility line crew or in-plant electrical team needs garments with an arc rating that meets the PPE category required under NFPA 70E. Many workers in this region need both.
How FR fabric behaves differently
Bulwark explains FR protection at three levels. Some fibers are flame resistant at the molecular level, such as Nomex and Kevlar aramids, and are usually called inherent. Others have flame-retardant chemistry added before the fiber is extruded, such as FR modacrylic and FR rayon. A third group is treated at the fabric level, such as FR cotton and 88/12 cotton/nylon blends. Bulwark’s position is that neither inherent nor treated is automatically superior. The old preference for inherent fibers dates from a time when treated fabrics lost protection in the wash, and today’s blends often combine several levels at once. What matters is certified performance that lasts for the life of the garment.
The standards that matter
NFPA 2112 sets the requirements for flame-resistant garments used to protect industrial workers from flash fire. Garments are tested as a fabric and as a finished product, and compliant items carry a certification label.
NFPA 70E covers electrical safety in the workplace. Clothing for arc-flash exposure carries an arc rating in calories per square centimeter, often expressed as ATPV (arc thermal performance value), the energy level at which the fabric is expected to allow the onset of a second-degree burn. The 2015 edition of NFPA 70E replaced the older Hazard/Risk Category (HRC) system with four arc-flash PPE categories. Category 1 requires a minimum arc rating of 4 cal/cm², Category 2 requires 8, Category 3 requires 25, and Category 4 requires 40. Some suppliers and older documents still say "HRC," so buyers should treat the two terms as related but not identical.
ANSI/ISEA 107 governs high-visibility safety apparel. It sorts garments by type (off-road, roadway, public safety) and class, based on the amount of fluorescent background and retroreflective material and how they are placed on the body.
What the two HES examples are rated for
The Bulwark SNS2T is a tall-size snap-front uniform shirt made of 4.5 oz./yd² Nomex IIIA (93% Nomex aramid, 5% Kevlar aramid, 2% other fiber). It is NFPA 2112 compliant and carries an arc rating of ATPV 4.4 cal/cm², which meets the Category 1 minimum. It has a banded collar, two chest pockets with snap flaps and a pencil stall, a snap placket, and adjustable snap cuffs. Regular sizes are sold as the SNS2.
View the Bulwark SNS2T Mens Front Uniform Nomex 4 Oz Work Shirt
The Bulwark VMV4HV is a hi-vis safety vest in a 7 oz./yd² blend of 48% modacrylic, 37% lyocell, and 15% aramid. It is rated CAT 2 with an arc rating of ATPV 9.0 cal/cm², and it is listed as compliant with ANSI 107-2010 Class 2 Level 2 and ANSI 107-2015 Type R Class 2. It uses 2-inch FR silver reflective striping front and back for 360-degree visibility, with hook-and-loop closures at the front and sides.
View the Bulwark VMV4HV Mens Hi Visibility Resistant Safety Work Vest
Together they show a common Houston combination: an arc-rated FR base layer for plant work, and an FR vest for anyone who also works near moving vehicles or equipment.
Bulwark’s background
Bulwark dates its FR line to 1971, when it began as a flame-resistant line under the Red Kap brand. Red Kap and Bulwark merged in 1996, Nomex was added to the line in 1992, and the company acquired Workrite in 2018. Bulwark became independently owned in 2021, when VF Corporation sold its occupational workwear business to Redwood Capital Investments. It now operates as part of Workwear Outfitters, based in Nashville, Tennessee. Its main markets are the electric, utility, and petrochemical industries, the same sectors that dominate Houston-area FR buying.
Construction and care
Protection depends on the whole garment, not only the fabric. Thread, closures, reflective trim, and labels all have to suit the rating. Both HES examples list industrial laundry (light soil) or home wash. Workers should avoid chlorine bleach and fabric softener unless the care label allows them, keep garments free of flammable contaminants such as oil and grease, and retire garments that are torn, worn thin, or heavily soiled. Repairs should use materials recognized for the garment’s certification.
How FR garments should be decorated
Decoration is where an FR program can quietly lose its protection. A logo added after certification becomes part of the garment, and NFPA 2112 requires aftermarket additions such as lettering, emblems, and trim to meet its requirements.
Embroidery should use FR thread, such as Nomex or another aramid thread, not standard polyester or rayon, which can melt or burn.
Patches should be made from FR or Nomex material and attached with FR thread.
Standard plastisol transfers and ordinary vinyl heat-press graphics should not be used. They can melt and add fuel to the garment.
Placement must keep reflective tape and the required fluorescent background fully visible. On the VMV4HV, the logo should sit in a clear panel, not over or between the striping.
Certification labels must stay in place and readable. If Bulwark’s guidance allows only a small decoration area, the safety requirement wins over branding.
For example, a Pasadena maintenance contractor might put a 3.5-inch FR-thread logo on the left chest of SNS2T shirts, opposite the pockets’ snap flaps, and add a small FR patch to the vest’s upper front panel, clear of the stripes.
What to ask your safety manager before ordering
Before HES quotes FR decoration, the buyer should get these answers in writing from the employer’s safety manager:
Which hazard applies: flash fire, arc flash, or both.
The required standard and minimum arc rating or PPE category.
Whether hi-vis is required, and which ANSI/ISEA 107 type and class.
Approved decoration methods, sizes, and locations, including any limits from the garment maker.
Whether company-provided laundering or home washing will be used.
FR clothing is one part of a wider safety program that also includes hazard assessment, engineering controls, training, and other PPE. Branding should be added only after those decisions are settled, and only in ways that leave the protective system intact.

