Custom Colortone Apparel with Your Logo
Colortone tie-dye tees and… sweatshirts in bright, saturated colors for camps, events and groups. Add your own logo with custom printing in Houston, Texas.
- COLO-8790Y
$45.10ColortoneColortone 8790Y Youth Crystal Wash Hooded Sweatshirt LogoXS - L - COLO-3500
$14.44 - $22.04ColortoneColortone 3500 Unisex Tie-Dyed Tank Top with Your Artwork+18S - 3XL - COLO-CD1000
$12.54 - $23.18ColortoneColortone CD1000 Multi-Color Tie-Dyed T-Shirt Custom Logo+14S - 5XL - COLO-CD1000Y
$13.10ColortoneColortone CD1000Y T-Shirt with Your Artwork+8XS - L - COLO-8888
$42.32 - $48.36ColortoneColortone 8888 Unisex Tie Dyed Full-Zip Sweatshirt Team LogoXS - 3XL - COLO-CD101
$23.74ColortoneColortone CD101 Spider T-Shirt with Your Artwork4XL - 5XL
Colortone: The Chemistry and Craft Behind Modern Tie-Dye
Tie-dye looks spontaneous, but a commercial tie-dye shirt goes through a controlled chemical process. The fabric has to be prepared, the dye has to bond to the cotton, the unbonded dye has to be washed out, and the folding has to be consistent enough that hundreds of shirts in one colorway look like they belong together.
Colortone is a useful brand for seeing how that works at scale. The company was established in 1988 in South Florida and describes itself as the largest tie-dye company in the United States. A 2021 expansion added a distribution center in Plantation, Florida, bringing its warehouse space to more than 200,000 square feet across the U.S. and the Dominican Republic.
Fiber preparation comes first
Tie-dye works best on cotton because the dyes used are designed to bond with cellulose, the main component of cotton fiber. Before any color goes on, the garment has to be clean and free of finishes that would block the dye. Colortone builds its shirts on 100% cotton, which gives the dye a consistent surface to react with.
The other key preparation step is soaking the fabric in soda ash, or sodium carbonate, dissolved in warm water. Home-dye suppliers such as Dharma Trading suggest about one cup of soda ash per gallon of water. Soda ash raises the pH of the fabric, and that alkaline condition is what allows the dye to react with the cotton. Without it, most of the color would simply rinse away.
How fiber-reactive dye bonds to cotton
Fiber-reactive dyes, such as the Procion MX type widely used for tie-dye, form a chemical bond with the cellulose molecules in cotton when the fabric is alkaline. Once that bond forms, the color is part of the fiber rather than a coating on top of it. This is why a properly made tie-dye shirt can stay bright through many washes while a cheap painted-on look fades quickly.
The reaction needs time and moisture. In standard tie-dye practice, the dyed garment is wrapped in plastic so it stays damp and is left to sit, or batch, for about 24 hours. Warmth speeds the reaction; a cold room slows it. A commercial dyehouse controls these conditions so that the result is predictable.
Folding and resist methods create the pattern
The pattern is set before any dye touches the shirt. Workers fold, twist, pleat or scrunch the garment and bind it tightly. The tight areas resist the dye and stay lighter, while exposed areas take on full color. Where two dye colors meet, they blend into a third shade.
Colortone’s two styles at HES show the difference that folding makes. The CD1000 Multi-Color Tie-Dyed T-Shirt uses the familiar spiral and swirl looks. It is a 5.3 oz. preshrunk 100% heavyweight cotton tee with a classic fit, taped neck and shoulders, a 7/8-inch rib collar and double-needle hems, and it comes in about 20 colorways, from bright options such as Fire and Jellybean to softer ones such as Cotton Candy and Willow: View the Colortone CD1000 Multi Color Tie Dyed T Shirt
The CD101 Spider T-Shirt is built on the same 5.3 oz. 100% cotton body, but the shirt is crumpled and bound so the dye forms a web of fine, branching lines rather than broad bands of color: View the Colortone CD101 Spider T Shirt
Fixation, rinsing and why the first wash bleeds
After batching, the shirts are rinsed. Cold water goes first, while the shirt is still tied, to carry away loose dye without spreading it into the white areas. Then the ties come off and the shirt is rinsed again and washed. Dye suppliers recommend a final hot wash with a detergent made to remove unbonded dye.
Even with careful rinsing, a small amount of dye can stay in the fabric without bonding. That dye can release in the first few home washes. This is normal for reactive-dyed cotton and does not mean the shirt is defective, but it does mean buyers should pass on a short care note.
Care note to share with wearers
Wash cold, inside out, and wash the shirt by itself or with similar colors for the first few washes. Avoid chlorine bleach. Tumble dry low or hang dry. Colortone states that each shirt is individually dyed, so color and pattern will vary slightly from piece to piece, and that variation should be expected.
Printing on a tie-dye background
A logo on tie-dye sits on a background that changes from light to dark across the chest. The print needs to stand out over all of it.
The usual answer is a white underbase: a layer of white ink printed first, flashed, and then printed over with the design colors. That keeps colors bright over dark sections of the pattern. A one-color white or black design is often the easiest to read.
Plastisol and water-based inks both work on tie-dye. Plastisol sits on top of the fabric and gives the most opaque, consistent color, which helps on busy patterns. Water-based ink soaks into the fabric and feels softer, but it is less opaque, so it may need an underbase or a lighter design to read clearly. Screen printing suppliers recommend low-bleed or low-cure inks on dyed garments, curing at the lowest temperature that still fully cures the ink, because heat can pull dye up into the print.
The most important step is a test print. Because the pattern shifts on every shirt, a logo will land on a pale area on one shirt and a dark area on the next. A good test places the design over both the lightest and darkest sections of a sample and checks for dye migration before the full run is printed.
Embroidery is also an option on these 5.3 oz. tees, typically as a compact left-chest mark about 3 to 3.5 inches wide with a light, open fill, so the stitching does not pucker the jersey.
An example order
For example, a church youth group planning a summer camp might order 120 CD1000 shirts in one colorway, with a white underbase and a one-color black camp logo on the front and the year on the back. Each camper’s shirt will have a slightly different swirl, but the logo and colorway tie the group together. Ordering all the shirts at once from the same colorway keeps the overall look consistent, and including the care note in each camper’s bag helps the shirts last past the first week.
Why controlled randomness works
Most textile manufacturing tries to remove variation. Tie-dye does the opposite. The folding method, colorway and dye process are controlled, and the exact boundaries are left to chance. A simple, readable logo lets that variation stay visible while still marking every shirt as part of the same event.
