Custom Kishigo Apparel with Your Logo

Kishigo hi-vis safety vests,… work tees and work jackets for road and site crews. HES in Houston adds your logo by embroidery or printing that clears the tape.

Kishigo: How High-Visibility Apparel Became Engineered Safety Gear

A worker standing on a highway shoulder at dusk has a few seconds to be noticed by a driver going 60 miles an hour. A bright T-shirt helps a little. A garment built to a visibility standard helps a lot more, because it is designed around how human eyes and vehicle headlights actually work. That difference is what turned high-visibility apparel from "bright clothes" into an engineered safety category.

A specialist brand

Kishigo has worked in high-visibility apparel since 1971, when the company started out with a sewing machine. Today its catalog centers on hi-vis vests, jackets and shirts, alongside cold-weather outerwear, flame-resistant clothing and accessories. Surveyor-style vests, with heavy pocketing and reinforced construction, are among its best-known products.

Daytime: fluorescent color

In daylight, the problem is contrast against a busy background of trees, concrete, equipment and traffic. Fluorescent materials absorb some ultraviolet and short-wavelength light and re-emit it as visible light, so they look brighter than ordinary colors, especially at dawn, dusk and on overcast days. That is why hi-vis garments use fluorescent yellow-green, orange-red or red. An ordinary orange shirt doesn’t do the same job, because it only reflects light rather than adding to it.

Nighttime: retroreflection

After dark, fluorescence stops helping, because there is little ambient light to convert. Retroreflective tape takes over. Unlike a mirror or a white surface, which scatter light in many directions, retroreflective material sends light back toward its source. When a driver’s headlights hit the tape, the light returns toward the driver’s eyes, making the stripe glow. Placement matters: bands around the torso and over the shoulders create a human outline that drivers recognize as a person, not a sign or a cone.

Coverage and the standard

ANSI/ISEA 107 is the American standard that defines how much fluorescent background material and retroreflective material a garment needs, and where it goes. It sorts garments by Type, which reflects the work environment, and by Class, which reflects the amount of visible material.

Type O, for off-road, covers workers who aren’t exposed to roadway traffic, such as warehouse or parking lot staff. It only goes up to Class 1.

Type R, for roadway, covers workers exposed to traffic on public roads and work zones. It comes in Class 2 and Class 3.

Type P, for public safety, covers emergency responders and law enforcement, who may need features like breakaway designs. It also comes in Class 2 and Class 3.

The Class sets minimum areas. Class 1 requires at least 217 square inches of background material and 155 square inches of retroreflective material. Class 2 requires at least 775 square inches of background and 201 square inches of retroreflective. Class 3 requires at least 1,240 square inches of background and 310 square inches of retroreflective. Type P garments have their own set of minimums.

The two Kishigo vests

The S5014 and S5015 High Performance Surveyors Vest, lime and orange respectively, is rated ANSI/ISEA 107 Type R Class 3. It is made of 100% polyester mesh with 2 inch high-performance reflective tape on 2.5 inch black contrast. It has seven pockets, including a radio pocket with a clear ID window, a pencil pocket, two full-length outside pockets, an inside tablet pocket and a hidden back pouch, plus a webbing-reinforced front zipper, padded neck and mic tabs.

View the Kishigo S5014 5015 High Performance Surveyors Work Vest

The S5021 and S5022 Women’s Black Series Heavy Duty Surveyors Vest, lime and orange respectively, is rated Type R Class 2. It pairs a solid polyester front with a mesh back and a heavy-duty black bottom section, which hides dirt and wear in the area most likely to get grimy. It has 2 inch reflective tape on 3 inch contrast, a women’s cut with adjustable waist cinches, 4 inch hip slits, five pockets and a mic tab. The black panel doesn’t make it a black vest. The upper body is still fluorescent, and the vest still carries a Type R Class 2 rating, so the black section is a practical feature for dirty work rather than a compromise on visibility.

View the Kishigo S5021 Womens 5022 Black Heavy Duty Surveyors Work

Which to choose

Federal work zone rules generally require Class 2 or Class 3 garments for workers exposed to traffic on public roads. Class 3 is the usual choice for high-speed roads, nighttime work and complex backgrounds. Class 2 suits most daytime roadway and site work at lower speeds.

For example, a TxDOT contractor crew working nights on a Houston freeway would typically need the Class 3 S5014 or S5015. A survey crew walking a pipeline right-of-way outside the city, or a field engineer on a commercial building site, could work in the Class 2 S5021 or S5022, with the solid front giving a better surface for a company logo.

Decorating hi-vis without breaking the rating

Logos are useful on safety vests because they identify crews and contractors at a glance. But decoration can take away from the visible area the rating depends on, so a few rules apply.

Print or apply logos only where the manufacturer allows it, and never on or over the reflective tape. Covering tape reduces retroreflective area and can drop a garment below its class minimum. Large logos on the fluorescent background also reduce background area, so keep them reasonably sized, typically a left-chest or back logo rather than a full-front design.

Material affects the method. On polyester mesh, like the S5014 and S5015, screen print ink sinks into the holes, so heat-transfer vinyl or other transfers made for mesh usually give cleaner edges. Embroidery on open mesh tends to pucker and is rarely recommended. On a solid polyester panel, like the front of the S5021 and S5022, screen printing and heat transfers both work well, and the surface holds fine detail.

Polyester can’t take high heat, so transfers should use low-temperature application and screen prints should use low-cure inks to avoid scorching the fabric or dulling the fluorescent color. A black or dark logo on a lime or orange background gives the best contrast and doesn’t compete with the fluorescent field.

The difference between bright and visible

Bright color is only the starting point. A visibility-rated garment combines fluorescent background, retroreflective tape and enough coverage, placed where drivers will see it, and tested to a standard. That is why crews and safety managers buy by Type and Class, not by color, and why decoration has to work around the tape rather than on top of it.

For embroidered logos on solid panels and other garments that suit stitching, explore our custom embroidery services in Houston: See our custom embroidery services