Custom Richardson Apparel with Your Logo

Choose Richardson caps, work… hats and beanies for dealers, clubs and businesses. Houston Embroidery Service matches your logo embroidery to each cap build.

How Richardson Grew Alongside Team Sports and Custom Headwear

Richardson is one of the most familiar names in custom caps, and the reason has less to do with fashion than with the people who first bought them. The company grew by serving team dealers, baseball programs and decorators, and the habits those customers demanded still shape how Richardson caps are built and decorated.

Team dealers came first

Richardson’s roots go back to 1970, when Neil Richardson joined a wholesale sporting goods company run by Howard Wicklund in the Eugene-Springfield area of Oregon. A few years later the Richardson family bought the business and renamed it Richardson Sports. In its early years the company supplied team athletic equipment to team dealers across the West Coast.

Team dealers are a demanding customer. They outfit schools, leagues and clubs, and they need the same product in the same colors season after season. A cap that changes shape or shade from one order to the next creates problems when a team needs to replace a lost hat mid-season. That pressure for consistency became part of Richardson’s identity.

Baseball’s influence

Demand for quality team caps was strong from the start, and baseball drove much of it. A baseball cap is part of the uniform: it has to match jerseys, fit a whole roster and hold a recognizable logo on the front. In the mid-1990s Richardson left the equipment business entirely to focus on headwear, a move that helped it grow into a national brand. The company is still family owned, is headquartered in Springfield, Oregon, and has additional production and distribution facilities in Texas and Ohio. It marked its 50th anniversary in 2020.

The style most people picture when they hear "Richardson" is the 112 trucker, a snapback with a structured front and mesh back that has become the company’s most popular cap.

Built for decoration

Because Richardson sold through dealers and decorators, its caps had to be easy to embroider. Structured front panels give stitches a firm surface. Consistent crown shapes let decorators predict how large a logo can be. Those qualities made certain models favorites among embroiderers, not just among wearers.

Still, the model number does not replace an artwork check. A center seam can split fine detail, a low crown limits vertical space, and specialty fabrics such as corduroy or perforated performance material behave differently under the needle. The logo should be digitized for the specific cap it will be sewn on.

Two Richardson caps available through HES

The Richardson 930 Trucker Cap takes the trucker shape in a different direction. The front is 100% cotton heavyweight corduroy, the back is soft 100% polyester mesh, and the crown is lined with lightweight cotton. It is a soft structured, five-panel, low-profile cap with a thin rope braid across the front, a pre-curved bill and a snapback closure. It comes in five two-tone colorways, including Amber Gold/Navy and Brown/Sand: View the Richardson 930 Trucker Cap

The Richardson 632 Laser Perf R-Flex Cap is a performance cap. It is made from 98/2 polyester/PU spandex, with a structured, six-panel, mid-profile crown, a pre-curved bill and a Stay Dri performance sweatband. Laser-cut perforations on the side and back panels add airflow. The R-Flex adjustable snapback fits roughly 7 1/8 to 7 3/4, and the cap comes in 14 colors: View the Richardson 632 Laser Perf R Flex Cap

Embroidery numbers for a trucker front

On a typical mid-profile structured trucker, the front embroidery area runs up to about 4.5 to 5 inches wide and 2.25 to 2.5 inches tall. A low-profile cap like the 930 has less height, so a front logo is usually kept to about 2 inches tall and 4 inches wide. A front logo of that size often runs 5,000 to 8,000 stitches, depending on how much fill it uses.

The 930’s five-panel front has no center seam, which is a real advantage. Lettering and fine lines can cross the middle without being split. The corduroy face needs attention, though. The raised wales can swallow thin satin stitches and small text, so the design benefits from a solid underlay, slightly bolder lettering and, for small details, a water-soluble topping that keeps stitches sitting on top of the ribs. The rope braid also sits just above the bill, so the logo should be placed high enough to clear it.

The 632’s structured six-panel front gives a firmer base but has a center seam. Logos with fine detail at the center may need to be adjusted so the seam does not cut through a key letter.

3D puff suitability

Puff embroidery uses a foam layer under satin stitches to raise the design. It needs a firm front panel and bold artwork: wide satin columns, letters at least about a quarter inch thick, and no tiny counters or thin outlines. The structured front of the 632 is the better candidate for puff, keeping in mind the center seam. The soft structured corduroy front of the 930 is less suited to puff. Flat embroidery or a patch usually looks cleaner on it.

How laser perforation affects stitching

On the 632, the perforations are on the side and back panels, and the front panels are solid. That leaves the front free for a normal logo. For side or back decoration, keep the design small and place it on areas with no perforations where possible. Stitching across perforated fabric can let stitches sink into the holes and weakens the fabric between them. A simple side flag or short text is a safer choice than a large, dense design.

A Houston example

For example, a youth baseball league in Pearland or Cypress might order 632 caps in league colors with each team’s name in 3D puff on the front and the league’s own logo stitched flat on the back. The adjustable R-Flex closure lets one size cover a wide range of players. A Houston construction crew might choose the 930 in Brown/Sand with a flat-embroidered company logo on the corduroy front and a crew number on the side mesh. The corduroy gives the cap a work-ready look without the fussiness of puff.

The league’s logo should be its own artwork. Professional or college team names and logos belong to their owners and need a license before they can be reproduced, even on a youth cap.

Why team credibility matters

Richardson’s caps were shaped by customers who needed consistency, easy decoration and dependable reorders. Those same needs apply to a landscaping company or a brewery today. Choose the model because its crown, fabric and closure suit the wearer, then match the embroidery to that specific construction.

See our embroidery digitizing