Custom Trucker Hats, Stitched or Patched

Custom trucker hats with… your logo stitched straight on or added as an embroidered patch. Mesh backs, printed fronts and women's caps. Get a quote.

A cap for a taproom merch shelf. A cap for the landscaping truck. A cap to hand out at a fishing tournament. Different jobs, but custom trucker hats all start with the same choice: is your logo stitched straight onto the front, or does it go on as a patch? The grid above holds more than 160 caps, and every one of them can be done either way on the front and sides. The back is different, and so are some of the caps. That's what this page sorts out.

Which Custom Trucker Hats Have the Back You Want?

A trucker is known for its mesh back. It's not all one mesh, though. The Richardson 112PL has a 95/5 polyester/spandex mesh that stretches. On the Kati S700M the mesh itself is printed, with color names like Heather Grey/ Texas Flag, Black/ Black/ Skull and Kelly Green/ White/ Clover. And the Valucap VC150M pairs a camo front with brown mesh in one color and black mesh in the other.

Something people don't expect: not every cap in this grid has mesh. The Columbia 216513, the Sportsman SP1650 and the Flexfit 6577CD piqué cap, for example, never use the word mesh anywhere on their product pages. If airflow out the back is the reason you're buying, read the cap's page before it goes in your cart. Saves you a box of the wrong caps.

Then there are the women's caps with an opening in the back where a ponytail goes through, like the Infinity Her ROSIE (a foam front with a soft polyester mesh back) and the JANET. ROSIE's product page asks for that opening and the snapback closure to stay clear of the design, and JANET's says the same about the opening. No argument there. Nobody wants thread over the spot their hair goes through.

That back is also where sizing hides. Read the size menu on the cap's page first: if it shows two size ranges, the way the Richardson 172 offers S/M or L/XL, every wearer needs a size written down before the order goes in. Buying for little kids? The size chart on the Richardson 112Y calls it a youth fit, ages 3 to 6.

Custom Embroidered Trucker Hats or a Patch?

Good news first: you don't need a special patch cap to get a patch. Thread and patch sit side by side as choices on each cap's order form, for any spot on the front and sides, lettering or logo, 5 inches at most. (One aside: the Back Center spot takes stitched lettering only.) So the real question is which one suits your logo and the front it lands on.

Thread straight on the front

Embroidered trucker hats done this way have no badge at all: the thread goes right into the cap's own front fabric. Before any of that, we digitize the logo, redrawing it as a set of stitches the machine can sew. On caps, that stitch plan starts in the middle of the design and works outward. Check whether the cap's product page calls it structured, meaning the front is stiffened to stand up on its own, or unstructured, which sits softer. Foam fronts are in here too, like the Valucap VC700, a 100% polyester foam front over a mesh back.

If your logo is mostly lettering, we'd stitch it straight on. Clean, and it's the lower-priced choice on the form anyway.

Custom trucker hats with patch

The patch on the form is an embroidered patch, meaning the design is sewn in thread onto a separate fabric badge first, and that badge then goes on the cap. We make those badges ourselves, at our patch facility. Want leather, woven or PVC instead? The form only lists the embroidered kind, so ask us first and we'll tell you what fits that cap. Our custom patch options show the full range.

Two caps here come with a patch already on them. Is that patch something we add? No. The Big Accessories BA656T arrives with a patch of cotton twill (a sturdy fabric with a fine diagonal weave) already fixed to its front panel, and your logo gets stitched inside it. That patch is small, though: 3¾ inches wide by 2 inches tall, and everything in your design needs to fit within that patch, leaving a margin of blank twill. A tall logo has to shrink a lot to fit a space that shape. The bigger patch on the BA682 Homestead is covered on our workwear hats page.

When the Front Is Already Printed

Printed caps look great on a shelf. But your logo has to sit on top of that print. More than 30 product pages here, the 5PTKR's among them, say to hold the background up against your thread colors, especially where it's patterned.

Plain-front pick: LOCALE makes two versions of its scenery look. The LOCALE 5PTKR has the scenery print on the crown itself. The LOCALE 5PTKRS keeps a plain 60/40 polyester/cotton front and puts the scenery on the mesh back. So if you love the scenery but want your logo on a plain background, go with the S.

Design a Trucker Hat With Us: Timing and Cost

StepHow longYour part
MOQ (minimum order quantity)1 capOrder one, or a box
Mockup (a proof image showing where your design lands on the chosen cap)2–3 working daysCheck the spot and the size, then approve
Production7–10 working days; the count begins at your sign-offNothing, we take it from there
Large ordersAsk usTell us how many caps and when you need them

Choosing a patch shows up on the bill. On the five spots that offer both methods, the patch line sits above the thread line, so a stitched logo is the leaner way to fill the same spot. Tight budget? Stitched lettering is the lowest choice on each of those spots. Past that, the total turns on three things: which cap, how many spots get filled, and the number of caps. If you like to read the fine print first, here it is: the Artwork Acceptance Policy, then the Spoilage Policy.

Snapback styles get their own page: snapback hats. More cap styles sit under custom hats, and shirts, hoodies and the rest live in custom apparel.

Send your logo and the cap's style number through our quote form, and next to each spot you want, write one word: thread or patch. Ordering from the cap's own page instead? Its form takes your file too, and has an Instructions field for that same note.